Ads-technologies Wireless Cable Modem Gateway SBG1000 Manual de usuario Pagina 32

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 161
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 31
26 SBG1000 User Guide
Home
X
ExitPrint
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Wall Mounting
If you mount the unit on the wall, you must:
Locate the unit as specified by the local or national codes governing residential or business cable TV and
communications services.
Follow all local standards for installing a network interface unit/network interface device (NIU/NID).
If possible, mount the unit to concrete, masonry, a wooden stud, or other very solid wall material. Use anchors if
necessary; for example, if you must mount the unit on drywall.
To mount your SBG1000 on the wall:
1 Print the Wall Mounting Template on page 28:
Click the Print icon or choose Print from the File menu to display the Print dialog box. (The following image is
from Adobe Acrobat Reader
®
running on Windows 2000; there may be slight differences in your version.)
Be sure you print the template at 100% scale. Be sure Fit to page is not checked in the Print dialog box.
Click the OK button to print the template.
2 Measure the printed template with a ruler to ensure that it is the correct size.
3 Use a center punch to mark the center of the holes.
4 On the wall, locate the marks for the mounting holes.
5 Drill the holes to a depth of at least 1
1
/
2
inches (3.8 cm).
Caution!
Before drilling holes, check the structure for potential damage to water, gas, or electric lines.
Vista de pagina 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 160 161

Comentarios a estos manuales

Sin comentarios